TIP TIG welding is 100 to 500% faster than TIG with superior quality than traditional TIG - Pulsed MIG - FCAW

TIP TIG Welding Videos - 4

TIP TIG PROVIDES LESS WELD HEAT AND BETTER WELD QUALITY THAN TIG
AND PROVIDES THOSE WELDS AT MIG WIRE FEED RATES.

Click on the Evolution of TIG icon if you want a TIP TIG brochure.

IF VIDEOS STALL REPLAY, SECOND TIME BETTER:

And they used to say the 6 o'clock position was tough. As you watch this video, remember this is the first time some of these welders have used TIG TIG.
I really like this guy, a little on the portly side, which would suggest like me he likes a beer or two, yet put a TIP TIG gun in his hand, give him a pipe to weld and he moves around the pipe like a feather weigt boxer.
We will take four TIP TIG units.

A BASIC WELD FACT. IT TAKES ONE TO FOUR TIG & SMAW
WELDERS TO DO THE WORK OF ONE TIP TIG WELDER.

EVERY TWO MONTHS WE HAVE A TIP TIG WORK SHOP AT OUR FACILITY LOCATED
AT THE PHILADELPHIA NAVAL YARD. FOR INFO AND TO REGISTER
CLICK ON THE WORK SHOP LINK AT THE TOP OF THE PAGE..

We also invite you to visit our facility and bring or send your weld samples.
Make an appointment: E-mail Ed@tiptigusa.com or tom@tiptigusa .com

COMPANIES WHO HAVE ATTENDED THE TIP TIG WORK SHOPS.

AREVEA - EXON - WESTINGHOUSE - WELDING SERVICES - KELLY CONSTRUCTION - TI-FAB
DELTA AIRLINES - ARMISTEAD MECHANICAL - UNION METAL - MID STATE CONTRACTING -
TRIUMPH FABRICATIONS - SIEMENS - ROLLS ROYCE - ENERFAB - DIAMOND POWER -
BODY COTE - SPACEX - NORTHROP GRUMMAN AND MANY MORE.

REGULAR TIG VERSUS TIP TIG WELD DEPOSITION DIFFERENCES.

This table represents the most common all position steels and alloy steel applications.

[1] Pipe Root	Regular Manual TIG wire feed rate. 10 inch/min (70 inch/min)	Manual TIP TIG wire feed rate increase. 25 - 50%
[2] Pipe Fill Wall < 3/8 (a)	10 inch/min (70 inch/min)	100 - 200%
[3] Pipe Fill Wall > 3/8	10 inch/min (70 inch/min)	100 - 300%
[4] 1/8 Fillet	10 inch/min (70 inch/min)	100 - 200%
[5] 3/16 Fillet Great setting also for all position cladding	10 inch/min (70 inch/min)	> 150%
[6] 1/4 Fillet	10 inch/min (70 inch/min)	200 to 400%

Note: Red is conversion from 3/32 2.4 mm wire to 0.035 0.9 mm wire.
5G pipe weld figures are real world. You will have some TIG welders that will
deposit slightly more weld wire and there will be TIP TIG welders that
can provide higher wire feed rates. TIP TIG rates will increase with automation.

ED'S MANUAL AND ROBOT WELD PROCESS CONTROL RESOURCES.

ED OPTIMIZED ROBOT WELDS FOR HUNDREDS OF COMPANIES. A FEW OF HIS PROJECTS,
FORD F150 FRAME - VOLVO CAB - CORVETTE FRAME- HARLEY FRAME - NEW BEETLE SEATS
AND THE ROBOT WELDS ON THE WORLD'S LARGEST CATERPILLAR TRUCK.

From optimizing and providing welding patents for automated, boiler water wall, pulsed MIG inconel clad welds for Welding Services Atlanta, to setting the robot welds on many of the most popular products sold in North America, if you want the training and educational resources to enable Best Weld Practices / Process Controls and optimize your manual / robot MIG and flux cored weld quality and productivity click here for Ed's materials.

For more TIP TIG data on the patent pending TIP TIG weld process
contact Ed Craig USA. Eastern Time. 828 658 3574.
E-Mail ed@tiptigusa.com or Tom O'Malley tom@tiptigusa.com.

To find out more on controlling manual and robot gage welds, MIG short circuit,
spray, pulsed MIG or flux cored, click on "Ed's Training Resources.

Next TIP TIG Welding Video | Previous Video | TIP TIG VS TIG Welding | View TIP TIG Welding Pictures

TIP TIG Welding Home || TIP TIG Welding Manual || TIP TIG Welding Automatic ||

TIP TIG Welding Pipe || TIG Welding || TIG Videos || Weld Reality Home

Site Established 2001. Ed Craig Weld Reality. E-Mail ecraig@weldreality.com. Phone Eastern Time USA 828 658 3574.